One of the best ways to really bring your yard to life is to create a water object such as a pond, stream or other types of display. By installing a pondless waterfall kit, you can easily create such a display and create one of the most beautiful decorations. You will have the joy of flowing water created to look like a natural habitat. It takes time and planning but is absolutely worth it.
The beginning of the project requires mapping out how you want it to look and marking the yard. Once you have your plan, use bright spray paint to mark the areas that you need to dig. You will need to map out where the reservoir, or bottom, of the display will be, including where the pump will go.
Digging needs to happen where the pump will sit. You should use a vault to place the pump in so you can keep rocks and other objects from damaging the pump. Once you have a nice big area for the basin or reservoir, dig a deeper hole to place the vault in the lowest spot. This will allow it to be in a position to pump all the water back to the top without any water settling and not entering the pump. The reservoir area should be perfectly flat and level with the pump in the middle. Any dirt you dig out should be kept to help build up the top and fill in areas where the liner is exposed.
The lining should be installed next. Place it in the reservoir. It is suggested that you use more than one layer to make sure it doesn't get punctured and leak water into the ground. With the middle hole deeper, place the vault and install the pump in the vault.
Attach the flex hose to the pump and run it uphill. If you want to dig a trench to bury the hose, you may at this point, but you should have enough dirt to bury it without a trench. It is best to keep it uncovered until the last step. This hose will be hooked up to the spillway to create the water flow.
You need to use large gravel to fill in the reservoir and then larger rocks to begin building the stream. These will be placed in various intervals along the rubber liner. The entire stream and system should be on top of the liner so you don't lose the water along the way. It will also keep the yard from being washed out. You are basically building a self-contained system.
The path should be lined with the larger boulders. As this is done, the stream will follow the path to the reservoir. When the boulders are in place, you can use peat gravel and other rocks to create the scene. Before you are done, attach the pump and fill the stream with water to make sure everything is flowing where it needs to go. You may have to make adjustments to keep water in the system and out of the yard.
After everything is in place, continue filling in the stream with the rocks and cover the liner and tubing with the extra dirt. Several inches of dirt should be used to allow you to plant things along the path. Other items can be placed to help make it look more natural.
The beginning of the project requires mapping out how you want it to look and marking the yard. Once you have your plan, use bright spray paint to mark the areas that you need to dig. You will need to map out where the reservoir, or bottom, of the display will be, including where the pump will go.
Digging needs to happen where the pump will sit. You should use a vault to place the pump in so you can keep rocks and other objects from damaging the pump. Once you have a nice big area for the basin or reservoir, dig a deeper hole to place the vault in the lowest spot. This will allow it to be in a position to pump all the water back to the top without any water settling and not entering the pump. The reservoir area should be perfectly flat and level with the pump in the middle. Any dirt you dig out should be kept to help build up the top and fill in areas where the liner is exposed.
The lining should be installed next. Place it in the reservoir. It is suggested that you use more than one layer to make sure it doesn't get punctured and leak water into the ground. With the middle hole deeper, place the vault and install the pump in the vault.
Attach the flex hose to the pump and run it uphill. If you want to dig a trench to bury the hose, you may at this point, but you should have enough dirt to bury it without a trench. It is best to keep it uncovered until the last step. This hose will be hooked up to the spillway to create the water flow.
You need to use large gravel to fill in the reservoir and then larger rocks to begin building the stream. These will be placed in various intervals along the rubber liner. The entire stream and system should be on top of the liner so you don't lose the water along the way. It will also keep the yard from being washed out. You are basically building a self-contained system.
The path should be lined with the larger boulders. As this is done, the stream will follow the path to the reservoir. When the boulders are in place, you can use peat gravel and other rocks to create the scene. Before you are done, attach the pump and fill the stream with water to make sure everything is flowing where it needs to go. You may have to make adjustments to keep water in the system and out of the yard.
After everything is in place, continue filling in the stream with the rocks and cover the liner and tubing with the extra dirt. Several inches of dirt should be used to allow you to plant things along the path. Other items can be placed to help make it look more natural.
About the Author:
Get a summary of the factors to consider when choosing a pondless waterfall kit supplier and more information about a reputable supplier at http://www.boulderfountain.com/pondless-waterfall.html now.
No comments:
Post a Comment